To Pre-set Time code

  1. Chech Menu Item 504 RUN MODE is set to REC RUN
  2. Set the INT TCG INT switch to , PRESET mode
  3. Press the TC PRESET button to access the Pre set Time code menu
  4. Using the Joystick vertically to increment or decrement the numeric value and the horizontal motion to change the value to be set.
  5. When the desired start time is achieved press the TC PRESET
  6. Confirm the start time by pressing the red REC button.

To change the frame rate:

  1. The System Frequency can be changed using item 25 in the System menu.
  2. From the Basic Menu:
  3. Item 020 selects the HD Sys format 720p or 1080i (this option is dependant on item 20 setting from the basic menu)
  4. Item 022 selects the playback format either Manual or Auto
  5. Item 023 Format Sel,selects the manual playback format HD_LP,HD_SP,422,411,DV or DVCAM.
  6. Item 030 selects the HD Frequency, 59/23 (drop frame) or 60/24 Non drop frame

Other useful item

Item 005 Selects the Super impose time code CMPST sets the composite superimpose on.

Items 800 DIF onwards set the Firewire options; data format, bandwidth etc.